« Looking forward in living overseas | Home | The Different Types of for Businesses screaming Janitorial Service Phoenix home clea »
Calculate the Size of the Room
By admin | January 24, 2012
The first step an electrical contractor like Cardiff electrical contractors will do is take measurements to determine the size of the room. In general the larger the room, the longer the blade span needs to be. In fact, very large rooms may require two or more fans. Blades can range from 36 inches for a 100 square feet room to 52″ for a 375 square feet room. The center of the room should also be determined as that is the best placement. However, for safety reasons never place a ceiling fan over a bed.Consider the Ceiling HeightAn electrical contractor like electrical contractor Cardiff or electricians in Cardiff will also need to determine the ceiling height as this can affect the type of mount required. In general, fans should be no lower than seven feet from the floor. Eight to nine feet is preferred. In fact, some building codes may mandate this. For low ceilings, a flush mount can be installed. For high ceilings or sloped ceilings, a down rod may be used to drop the fan to a more preferred height.Seek Quality ComponentsQuality components are another concern. An electrical contractor will advise clients to avoid cheap materials. Instead, look for heavy, die-cast parts as these will help reduce noise and are less likely to wobble. Mounts that include sealed bearings will last longer has they provide permanent lubrication. In addition, make sure the blades are weighted and balanced, and the fan is backed by a good warranty.Consider Other OptionsAside from matching the decor of the room, there are several other options that an electrical contractor can suggest. For example, blade pitches range from 8 to 15 percent–the higher the pitch, the more air that is circulated.
Topics: cool hobbies | Comments Off
Comments are closed.